PolyCure DirtGlue
polymer drying agent --
to enhance the speed,
strength, and longevity of DirtGlue mix-in applications for traffic
areas
PolyCure is a
powerful, high-tech drying agent specifically engineered to speed
the drying and curing process of DirtGlue polymer mix-in
applications for driving surface applications. PolyCure is non
hazardous and will not adversely affect people, animals, fish, or
other aquatic life. PolyCure is applied to dry soil and mixed in
prior to mixing in the DirtGlue polymer.
Cost Effective and
Exceptional Results:
PolyCure assures such
complete drying and curing of the DirtGlue polymer in mix-in
applications that it actually enhances the application thus creating
a better, stronger final product in areas where there will be
traffic.
Easy to use, built to
last:
PolyCure is a dry
powder concentrate that is applied straight to the dry soil and
mixed in prior to the application of the DirtGlue polymer. Product
is easily applied using anything that is capable of spreading dry
powders or granules.
Most other polymer
dust control products on the market use rely on air drying to cure
the polymer in mix-in applications. DirtGlue Enterprises’ PolyCure
use a proprietary powder admixture that increases stability in the
soil and enhances the already hydrophobic nature of DirtGlue
polymer. This insures each application keeps working long after
other products fail.
DirtGlue Dry Powdered Polymer Compound For Use As a Paver Joint
Admixture
Creating strength, and longevity when mixed into paver joint sand
for patios, driveways, walkways
DirtGlue Dry powdered polymer compound:
DirtGlue Dry powdered polymer compound is a powerful, high-tech
blend of compounds including a catalyst with dry polymer
specifically engineered to be mixed with sand to eliminate washouts
and erosion between pavers, bricks, patio blocks, and flagstones in
walkways driveways, patios, etc. The added strength helps keeps the
pavers in place and helps prevent weeds and all
types of
vegetation from growing in the joints. DirtGlue Dry
powdered polymer compound is non hazardous and will not adversely
affect people, animals, aquatic life or plants.
Cost
Effective and Exceptional Results:
DirtGlue Dry powdered polymer compound assures strong stable paver
joints that resist erosion and movement at a cost that is much lower
than typical paver joint sand.
Easy to
use, built to last:…
DirtGlue Dry
powdered polymer compound is applied by mixing the dry product into dry sand
which is then spread onto the application area and swept into the
joints. Once washed in with water it dries to form a firm, stable,
flexible joint that resist erosion. Product mixes very easily with
sand. Once mixed with the sand the sand is easily applied spread
over the area and swept into the joints and then wetted.
Most other polymer
dust control products on the market rely on air drying to cure
the polymer in mix-in applications. DirtGlue Dry powdered polymer
compuund uses a proprietary powder admixture that increases stability in the
soil and enhances the already hydrophobic nature of DirtGlue
polymer. This ensures each application keeps working long after
other products fail.
PM-Tac the Environmentally
Friendly Dust Control
PM-Tac is a powerful, high-tech
bonding agent specifically engineered to agglomerate and bond soil
particles together to eliminate dust. There are no harmful chemicals
and will not adversely affect people, animals, fish, or other
aquatic life. A non-hazardous, water-soluble product, that may be
applied to any and all environmentally sensitive areas.
Cost Effective and Exceptional Results
PM-Tac creates a thin flexible
surface crust in areas where there will be no traffic this crust
will last for many months eliminating dust at a very low cost.
Easy to use, built to last
PM-Tac is a liquid concentrate
that is diluted with water. Dilution rates vary depending on
application and performance needs. Product is easily applied using
anything that is capable of spraying water ranging from small
agricultural sprayers to pressurized or non pressurized water truck
and hydroseeding equipment. NON-TRAFFIC areas ONLY!
Most other polymer dust control products on the market use vinyl
acetate copolymers. DirtGlue Enterprises’ polymers use a proprietary
polymer additive / mix (with no vinyl acetate copolymers) that is
more UV stable and more hydrophobic. This insures each application
keeps working long after other products fail.
Please contact me for a
request for quote at no obligation or cost to you. I'll need your
phone number, email, and delivery address as well as dimensions of
your project.
